Oil selection tool
Mobil DTE PM and SHC PM for bearing and gear circulating systems, and Mobilith SHC PM grease for wet end, press and calender bearings. Order online or ask an expert.
Original Mobil oils
from an authorized distributor
Since 1993
in machine lubrication
208 L, 16 kg and 174 kg
order online from OlejeSklep
Oil analysis
oil and machine condition in one report
Prices and availability come live from OlejeSklep.pl, the Mobipol shop.
Mineral oil, ISO VG 220
Mineral oil for paper machine circulating systems that lubricate bearings and gears.
Choose it when:
Synthetic oil, ISO VG 320
Synthetic oil for the toughest paper machine circulating systems and calender rolls.
Choose it when:
Synthetic grease, NLGI 1.5
Grease for critical rolling bearings in paper machines, working from -40 to 150°C.
Choose it when:
Not sure whether you need an oil or a grease? Ask an expert.
In a paper machine the lubricant works with water, steam and chemicals. Wear starts with water in the oil, rust and deposits, before the bearing heats up.
Water in the oil
DTE PM and SHC PM separate water easily. SHC PM keeps good filterability even with a lot of water in the system.
Rust and corrosion in the wet end
DTE PM protects against rust when water and chemicals get into the oil. Mobilith SHC PM protects bearings from corrosion in acidic and alkaline water.
High temperature and steamBoth oils resist oxidation. SHC PM lets the machine run at higher steam pressure, temperature and speed.
Deposits in lines and filters
The good filterability of DTE PM and SHC PM keeps oil lines and flow control devices free of deposits.
Bearing and gear wear
DTE PM and SHC PM protect bearings and gears against wear. Mobilith SHC PM protects slow-speed bearings under heavy load.
Sample analysis shows viscosity, oxidation, water and contamination, so you change the oil when it is needed. Order from OlejeSklep: oil analysis for paper machines. How oil analysis works
“Tell me whether you lubricate a wet end circulating system, a calender or press bearings. I will point you to an oil or grease that handles water and heat.”
A graduate of Poznan University of Technology. At Mobipol he provides technical support to industrial customers and runs training on oils and greases.
Prefer to call?+48 71 359 34 62Mineral DTE PM handles typical paper machine circulating systems, including the wet end, where water gets into the oil. Choose synthetic SHC PM for the most demanding systems: high steam pressure, temperature and speed, and calender rolls.
DTE PM and SHC PM are circulating oils that lubricate bearings and gears. Mobilith SHC PM is a grease for grease-lubricated rolling bearings: in the wet end, the press, and calender and felt rolls.
Both greases are NLGI 1.5 and differ in base oil viscosity: ISO VG 220 or 460. The machine or bearing documentation gives the right viscosity. If you do not have it, we will choose it together.
It is compatible with most mineral oil-based greases, but mixing reduces its performance. The manufacturer recommends cleaning the system thoroughly before changing grease.
Start with the machine documentation, but sample analysis tells you the timing most reliably. Viscosity, oxidation, water and contamination show whether the oil can keep working.
